Workshops
At Our Location
3-Day NFPA 86 Combustion Applications Workshop
Length: 3 days (24 hours)
Course Hours: 8:00 am-4:00 pm
Certification of Completion: A Certificate of Completion will be provided upon successful completion of the course.
Course Overview
This Three (3) Day Workshop provides more in-depth knowledge of NFPA 86 combustion safety and equipment than the one-day basic workshops with added hands-on simulation. Day One provides a detailed overview of combustion equipment fundamentals. Day Two builds beyond the basics by offering practical application knowledge using simulators and props, as well as provides troubleshooting tips. Day Three focuses on control and tuning. furnace standards and Combustion Hazard Awareness.
Training: Day 1
• Combustion System Basics
• Equipment Fuel Train Basics- W/Simulator
• Safety Interlock Testing- W/Simulator
• Burner Management Sequencing
• Safety Shutoff Valve Tightness Testing (SSOV & Manual Type)- W/Simulator
Training: Day 2
• Combustion System Troubleshooting- W/Simulator
• NFPA 54 Gas Piping Safety
Training: Day 3
• Combustion Control & Tuning
• NFPA 86 Furnace & Oven Standards
• Combustion Hazard Awareness
Typical Attendees
• Supervisors, Managers
• EHS & Risk Professionals
• Engineering Staff
• Maintenance, MTE’S, MTM’S
• Operations, Facilities, Utilities Employees
• Planners, Buyers, Purchasing Agents
Knowledge Outcome
• Apply NFPA learned lessons to your facility
• Understand fuel-train components
• Recognize vented and ventless gas-train designs
• Apply combustion and air/fuel ratio controls
• Identify applicable Standard and Code requirements
• Correctly service system device or component and test same per code or standards
• Understand BMS System Sequencing process
• Develop a maintenance combustion program with annual valve-train safety inspections
Presenter
The workshop is led by Chuck Campbell, an industrial combustion safety expert with over 40 years of field training experience.
Dates
• April 18 - 20, 2023
• June 6 - 8, 2023 - Atlanta, GA
• July, 18 - 20, 2023
• September 26 - 28, 2023 - Los Angeles, CA
• October 24 - 26, 2023
Also Available At Your Location
Please contact our training experts for pricing and to schedule this workshop at your location at your convenience.
Talk to Our Experts
$2500 PER PERSON
FOR 3 DAYS OF CLASSES
To register, click the REGISTER button and you will be redirected to www.rockfordsystems.com for our online reservation system and credit card payment.
We accept payments by credit card (Mastercard, VISA, American Express) and purchase orders.
You will receive a confirmation email with training details upon completion of your order.
Rockford Combustion offers workshops our Training Center in Rockford, Illinois, approximately 100 miles northwest of Chicago, Illinois.
Airports:
Chicago O’Hare International Airport (ORD) – Approx. 70-mile drive NW to Rockford Training Center
Chicago Midway Airport (MDW) – Approx. 85-mile drive NW to Rockford Training Center
Milwaukee General Mitchell International Airport (MKE) – Approx. 85-mile drive SW to Rockford Training Center
Airport Shuttle Bus Available
https://web.coachusa.com/vangalder
Training Center Address:
Rockford Systems, 5795 Logistics Parkway, Rockford, Illinois 61109
Recommended Hotel:
Holiday Inn
7550 E State St, Rockford, IL 61108
www.holidayinn.com/rockfordil
Use our corporate ID# 787011643 for the best rate!